PDA

View Full Version : Sportruk Gallery


Sportruk
03-25-2007, 08:51 PM
This is my 1988 F351 Stroker Edition. Well actually, it started as an '88 F150 Custom 302, 5 speed. I bought it back in '91 and immeadiately tore into it. It went through major body and frame modifications and was finally road ready in '95. During the 4 years, it received a carbed 351 and FMX tranny from an '80 Grand Marquis. Since '95, it has continued to get updated. It started with a mild rebuild on the engine, interior changes, '91 T-Bird IRS, Air Ride suspension, Lentech AOD tranny, Torino Shaker hood scoop, Torque Thrust II wheels and last year, a 351/408 stroker engine, dynoed at 330rwhp and 400rwtq.



Original Truck:
1988 F150 Custom Reg cab, Short box, Daul Tanks, Black.
5L, 5 speed, 3.08 gear.

Exterior Mods:
Fiberglass Repro Torino Shaker Scoop, Airbox and hood reinforcement, Billet support
3" Chop top with uncut Windsheild
3" Frontend Section
3" cab stretch with angled Dodge rear window
Ranger one piece door glass
Explorer Mirrors
Shaved door handles
Grand Marquis consealed wipers with handmade cowl
Headlights lowered 2"
Handmade grill with Dodge Ram inserts
Frenched licence plate and Grand Am driving lights
Sunroof (Came with truck)
Rear portion of rear fenders lowered 1.5"
Flipped tailgate handle
'94 Taillights
Handmade roll pan
Bullhide spray in liner
Custom sparetire mount/air system compartment box
FiberBec box lid
'94 Mustang Chrome Yellow PPG Concept single stage
Custom F351 Fender badges

Chassis Mods:
'91 T-Bird IRS
2.5" frame stretch
Bell Tech 3" drop I-beams
Raised radius arm brackets
Custom Sway Bar mounts
Slam Specialties Air bags
Air Ride air system with remote
QA1 Billet shocks
American Racing Torque Thrust II 18x 8 wheels
BFG g-force 225/45/18 and 255/45/18 tires

Drive Train:
Seasoned '74 351 block
AFR 185 61cc emmissions heads
Eagle 4" stroker cast crank
Eagle forged 6.2" rods
Keith Black Forged 27cc dish pistons .030" over
9.6-1 compresson ratio
Comp Cams 35-424-8 Retro fit roller cam 224/228, .512/.512, 110 VLC
Edlebrock Performer RPM intake
Edlebrock 750 #1411
MSD Pro-Billet dist.
MSD 6AL ignition box
Crane PS91 E-coil
Lentech AOD Street Performer Plus race tranny, rated to 700 HP, 1800/2200 stall and electric OD lockout
Custom length drive shaft
Powermaster 200 amp alt
'94 Windstar dual electric fans
Ford Motorsport rocker covers
Ford Racing shorty headers
2.5" into 3" crossover pipe 316L Stainless Steel
3" high flow cat StSt
Handmade muffler, Magnaflow design, 3"in/twin 2.5" out,316L Stainless Steel
Dual 2.5" tailpipe, under axle, 316L Stainless Steel

Interior:
Grand Marquis steering column with Tempo wheel
Custom Fiberglass center pod
Nissan 300ZX Turbo bucket seats
Custom center seat/console
Painted Instrument cluster trim
Gray Twead upholstery with Yellow piping
Air conditioning from '94 F150
Door panel inserts
Handmade Billet-Dash insert, Shifter, steering column and heater knobs
Windstar auto dimming mirror with headlight delay
Alpine 3 disc indash
Alpine 11 band EQ
RF 401S Sub amp
RF 4020 4 chanel amp
RF RFP1410 10" subs in 1.5 cuin non-ported box
Infinity Kappa 6x9 coax
JL 4" mids
B&W tweeters
Grand Marquis power windows
Grand Marquis cruise control

Unmodified Stock Parts:
Glove box
Cigarette lighter

http://i15.photobucket.com/albums/a358/Sportruk1/100_3998copy1.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/SportrukPics13.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/SportrukPics03.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/SportrukPics09.jpg

This is the driving height. The ones posted above are at full drop. It can still be driven at that height, but sitting on the bumpstop makes for a rough ride.

http://i15.photobucket.com/albums/a358/Sportruk1/SportrukMid.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/408%20Stroker/408Stroker228.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/408%20Stroker/408Stroker226.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/408%20Stroker/408Stroker233.jpg

Sportruk
03-25-2007, 08:52 PM
Some more.
http://img.photobucket.com/albums/v203/Sportruk/Sportruk%20Pics/Rear_Axle_190.jpg

http://img.photobucket.com/albums/v203/Sportruk/Sportruk%20Pics/Rear_Axle_195.jpg

http://img.photobucket.com/albums/v203/Sportruk/Sportruk%20Pics/100_1556.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/Sportruk/SportrukPics017.jpg

http://i15.photobucket.com/albums/a358/Sportruk1/Sportruk/100_2059.jpg

Before and After
http://i15.photobucket.com/albums/a358/Sportruk1/BeforeAfter.jpg

Smokefan
03-25-2007, 08:55 PM
Nice camera work on the first picture, almost makes it look like a model!:t-up:

Sweet Ride!:brvo:

MaxPower
03-25-2007, 08:57 PM
Very nice. :brvo:

Alot of wrench time into that one.

taisa899
03-25-2007, 09:17 PM
If you look on his mods on the FTW gallery all it says is "the whole truck":t-up:




Jim

98nascartruck
03-25-2007, 09:36 PM
Shawn has done an AWESOME job on his truck:t-up: and its a truck everyone needs to see inperson!!!!



Gordon

fordtough.ca
03-26-2007, 01:36 AM
Wow!!!!!!!!!!!!
We will see it soon
This thing looks like a toy
Well done
I love the air ride

FirstTry
03-26-2007, 09:17 PM
absolutely beautiful!

fordtough.ca
01-02-2008, 11:43 PM
absolutely beautiful!
Yep
:)
Looks so much better in person

Buzzy
01-02-2008, 11:48 PM
thats impressive just from a body work point of view. Hell I removed a body line and I know what that took. I cant start to think of the hours that has in it A+++

SKRWZ
01-03-2008, 12:50 AM
I have seen this truck in person, and Shawn did a great job with it hes has many hours invested in it and it really shows.

lynger
01-03-2008, 12:54 AM
:jawdrop: sick ride man!!!

v8ranger
01-03-2008, 07:27 PM
sweet truck i have seen it in person a few times and love it done very well

MrSen
01-03-2008, 08:48 PM
Nice truck.....I love the before and after photo.

MrSen

MRGADGET
01-04-2008, 07:54 PM
You rock buddy,Sweet Ryde.First picture I thought was a Remote Controlled Toy.Well Done.

98nascartruck
01-04-2008, 08:11 PM
I have seen his truck alot and you need to see inperson to what he has done to his truck!!! I think I should email him about checking out this site again, I know he has been very busy with work!!! Any of you in the Hamilton/Burlington area need to come out the Mapleview Mall cruise night on Wed. night when it starts up again in May.....I THINK!!!! If the weather is nice Shawn is there with his truck!!!

2insane
01-04-2008, 09:47 PM
Wicked ride, Very nice detailing on frame Would love to see that in person

Dazed
01-04-2008, 10:07 PM
sweet ride, i really appreciate the time and effort put into your hands for this truck. I wish I could do stuff like that!!! unfortunately all my hands are good for is diagnosing oil refinery equipment with problems, which equals higher gas prices for us. DOH!

LaredoRV
01-04-2008, 11:57 PM
Wow.... That... is... Speech less... Wow...

taisa899
05-07-2009, 02:00 AM
just thought I'd bring this one back to the top for those members who haven't seen his truck

Lilbigtrk
05-07-2009, 02:49 AM
ver nice truck you have put a lot of time and money in to her shes is gorgeous.

98nascartruck
05-07-2009, 09:15 AM
Jim....actually Shawn is making some big changes to his truck and mainly to the front end of the truck. What he is doing is putting on a 1995 F-150 front end on his truck and what I have seen his truck will look AWESOME!!!!

taisa899
05-07-2009, 03:26 PM
the man does love to modify!

98nascartruck
05-07-2009, 04:24 PM
the man does love to modify!


Yes he does and this is his biggest change since I have know him, his last one was when he put on that shaker hood a few years ago.

taisa899
05-07-2009, 05:38 PM
I haven't talked to him in a couple years. Is he still a leader over at FTW?

98nascartruck
05-07-2009, 05:45 PM
YEAH....there are only a few members that posts every once in awhile!!!!

Slim188
05-07-2009, 06:10 PM
I have to admit the first picture in the bunch i could of sworn was a model...thats one sweet ride.

LayinHp
05-07-2009, 07:06 PM
the most impressive thing is he did the work in a 1 car garage....... ive never seen the garage but have herd its a tight fit lol


ive also seen this truck a few times in person and it looks killer

98nascartruck
05-07-2009, 07:22 PM
I am with you Todd about where he works on his truck and I have been to his house. He does have a big 1 car garage,BUT he has his tools and work bench and it makes his garage looks small!!!

98nascartruck
06-27-2009, 12:22 PM
Like I said in a previous post(#22) that Shawn is the process of a major project on his truck!!! I thought I would post the link from another site on the his project, so everyone can check it out themselves!!

http://fordtruckworld.tenmagazines.com/ew/topic.asp?id=545853&s=my_winter_mods

CanadianRanger
06-27-2009, 10:57 PM
WOW....quite a build!!!

Thanks for the link.

98nascartruck
07-27-2009, 09:23 AM
UPDATE:

He just finished the truck and its looks AMAZING!!!!!