Drawing of Torsion Bars adjustment

[mika]

Hi,
I need help - Where can I find a drawing (technical documentation) of Torsion Bars adjustment?


http://truxxx.com/ford_products/101050.htm

I want to do it by myself. Can somebody help me?

I just want cut this part on the laser for me and my fends in Poland. I need the drawing from truxxx adjustment or DXF file.

What I need is a drawing of part NR 7 Adjusterf from this link

http://www.therangerstation.com/tech_library/TorsionBar.html.

It will be cheaper to cut this part in Poland then buy it in USA.

It is important for all user of Explorer in my country.

[CanadianRanger]

I was looking for one too. If I come across a drawing I'll post it.

[Bush_aholic]

Working on getting it up(this is for a 99 F150 might help a bit), I doubt this will work but here is the link. I will try to get it as a word .doc and I can send it through e-mail...Let me know if it works PLEASE!!!!

http://www.alldatadiy.com/alldata/AFI~V11901406~C41361~R0~OD~N/0/70910848/78036491/78036530/110620745/34853741/34864218/34864722/56265348/14411632

It's not the drawing you want sorry! But it's about the torsion bars, that's what I originaly thaought you were asking

[mika]

I can not open this side :http://www.alldatadiy.com/alldata/AF...65348/14411632

I need Login Name:- ? and Password - ?

[Bush_aholic]

Ya I dident think it would work, I will try somthing else when I get a chance. It's the how to remove and re-install torsion bars on 99 f150

[CanadianRanger]

I think he is looking for a dimensioned drawing (like AutoCAD) to cut his own torsion keys.

Certainly less expensive =)

[mika]

yes, I' m looking for a dimensioned drawing.

[Chris.S.]

best bet would probably be to order a set. You can get them on ebay for about 50.00USD