Join Date: May 2008
Location: North Bay
Posts: 368
|
|
LinkBack | Thread Tools | Display Modes |
Gave the duty a little bit of flare today
I bought some bushwacker cut out flares and got them installed today
These pics shows how much was cut out of the wheel wells
I used a grinder with a cut off wheel and a sawzall to do the cutting. you can't tell, but i'm wearing saftey glasses. Better to be safe than sorry
Lots of room now
It gets dark early now..so I went next door to the movie theater to take some ( somewhat blurry) pics
looks like we were real close with guessing where to trim the bumper to match the cut out flares
Now the only problem with them is they make my tires look too small....hmmmmmmmm
These pics shows how much was cut out of the wheel wells
I used a grinder with a cut off wheel and a sawzall to do the cutting. you can't tell, but i'm wearing saftey glasses. Better to be safe than sorry
Lots of room now
It gets dark early now..so I went next door to the movie theater to take some ( somewhat blurry) pics
looks like we were real close with guessing where to trim the bumper to match the cut out flares
Now the only problem with them is they make my tires look too small....hmmmmmmmm
| Sponsored Links | |||
|
Advertisement
|
|
||
Join Date: Jan 2008
Location: watson lake, yukon
Posts: 4,280
Nice job..and good guessing as well
Maybe 40's in the future? That is becoming a beast.
Maybe 40's in the future? That is becoming a beast.
2013 f150 Ecobeast
3.55 E locker
FX4 Screw
SSI tuned!!!!!!!!!!!!!!!!!
Join Date: Feb 2009
Location: Northeastern BC
Posts: 996
That looks excellent. Good job mating it them up with the bumper.
But, unfortunately, we require a minimum of 15 pieces of flare.
http://www.youtube.com/watch?v=-bXHPqj3NcI
But, unfortunately, we require a minimum of 15 pieces of flare.
http://www.youtube.com/watch?v=-bXHPqj3NcI
If Princess Auto were a real girl, I'd ask her to marry me.
|
|
|
Join Date: Jan 2008
Location: Maple Ridge, BC
Posts: 800
Nice work, trucks looking pretty badass.
Join Date: Oct 2008
Location: Quesnel
Posts: 31
Looks good...nice work.
Join Date: Oct 2008
Location: Omemee Ontario
Posts: 547
Looks good. Still no back bumper
Join Date: Aug 2008
Location: Calgary Alberta
Posts: 1,054
Looks awsome, what size tires you plan on putting on?
1997 F-150 xl
1984 Honda XR200R (the toy)
2007 Honda CRF100f (the spare toy)
2005 Jayco Baja 10Y (the home away from home)
Join Date: Nov 2007
Location: Burlington
Posts: 3,899
Nice Mod 
Join Date: Dec 2007
Location: Cochrane, Alberta
Posts: 1,120
Looks good
2016 F150 XLT XTR 4x4 2.7 Ecoboost
Join Date: May 2008
Location: North Bay
Posts: 368
hahhaah...ya...still no back bumper
I'm going to do some measurements with the truck at full flex and turn to see what will fit
I'm going to do some measurements with the truck at full flex and turn to see what will fit
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
| Display Modes | |
|
|
| Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Little bit of offroading | Seb_L | Photo and Video Gallery - Members Rides | 11 | 05-22-2009 09:19 PM |
| Bit the bullet on a 2009 FX4 | canoetrpr | New Members Introductions | 12 | 05-09-2009 11:02 AM |
| Posting Rules | |
