Join Date: Dec 2009
Location: Mount Hope, Ontario
Posts: 33
|
|
LinkBack | Thread Tools | Display Modes |
Auto Climate Control F to C display.
I have an 06 F-250 Lariat with the automatic climate control system.
When I bought the truck in Feb. 09, the temperature display read out in Celcius.
One day in the summer I started the truck and the display was blank!
I turned the truck off, restarted it and the display read out in Fahrenheit?!
I've looked in the manual and don't see anywhere were it tells you how to switch back to Celcius.
I'm guessing you have to depress several buttons in sequence to switch it back, or maybe the dealer has to do this via an ecu hookup.
Anyone know what's required?
When I bought the truck in Feb. 09, the temperature display read out in Celcius.
One day in the summer I started the truck and the display was blank!
I turned the truck off, restarted it and the display read out in Fahrenheit?!
I've looked in the manual and don't see anywhere were it tells you how to switch back to Celcius.
I'm guessing you have to depress several buttons in sequence to switch it back, or maybe the dealer has to do this via an ecu hookup.
Anyone know what's required?
| Sponsored Links | |||
|
Advertisement
|
|
||
Join Date: May 2008
Location: Oakville, ON
Posts: 234
Try this:
To switch your display between US and Metric you hold down the "auto" button and press the "defrost/floor" button.
To switch your display between US and Metric you hold down the "auto" button and press the "defrost/floor" button.
2001 F350 CC SWB 6spd....currently getting a complete 'makeover'. Stay tuned.
Join Date: Dec 2009
Location: Mount Hope, Ontario
Posts: 33
Quote:
Originally Posted by LOOSEWHEEL
View Post
Try this:
To switch your display between US and Metric you hold down the "auto" button and press the "defrost/floor" button.
To switch your display between US and Metric you hold down the "auto" button and press the "defrost/floor" button.
Hey, thanks for the info. LOOSEWHEEL.
I tried doing this on the weekend several times, but the display is still reading in F!
Perhaps it's a 'stealership' fix.
|
|
|
Join Date: May 2008
Location: Oakville, ON
Posts: 234
Hmmmm........That should work??????
Try pressing and holding the MAX A/C and Defrost buttons for approx. 1 second??????
Try pressing and holding the MAX A/C and Defrost buttons for approx. 1 second??????
2001 F350 CC SWB 6spd....currently getting a complete 'makeover'. Stay tuned.
Last edited by LOOSEWHEEL; 01-11-2010 at 10:55 AM. Reason: added image
Join Date: Dec 2009
Location: Mount Hope, Ontario
Posts: 33
Hi again LOOSEWHEEL,
Ah Ha, that little pic is helpful.
On the weekend, I pushed and held 'Auto', button #11, and then pushed the 'Defrost/floor', button #5. I tried a quick push of #5, and then tried holding both, but still no success.
However, I see just below the above schmatic it says to push the two buttons at the same time. So, I'll try that later today.
If that still does not work, then I'll try your second suggestion, from what I gather, I am to push buttons #2 and #3 at the same time and hold. Is that correct?
Again, thanks for your help on this.
Ah Ha, that little pic is helpful.
On the weekend, I pushed and held 'Auto', button #11, and then pushed the 'Defrost/floor', button #5. I tried a quick push of #5, and then tried holding both, but still no success.
However, I see just below the above schmatic it says to push the two buttons at the same time. So, I'll try that later today.
If that still does not work, then I'll try your second suggestion, from what I gather, I am to push buttons #2 and #3 at the same time and hold. Is that correct?
Again, thanks for your help on this.
Join Date: May 2008
Location: Oakville, ON
Posts: 234
You will need to hold both at the same time for 1 sec. Pushing one at a time will not access the secondary functions. Good luck.
2001 F350 CC SWB 6spd....currently getting a complete 'makeover'. Stay tuned.
Join Date: Dec 2009
Location: Mount Hope, Ontario
Posts: 33
Hey LOOSEWHEEL,
"You da Man"!!!!!
I went out this afternoon and pushed the 'Auto' button and the 'Defrost/floor' buttons, both at the same time, held them for about 1-2 seconds and................presto!!!
Now I've got my read back to Celcius!!
Thanks again for your help on this one. It's been driving me nuts having it reading out in Fahrenheit all this time.
"You da Man"!!!!!
I went out this afternoon and pushed the 'Auto' button and the 'Defrost/floor' buttons, both at the same time, held them for about 1-2 seconds and................presto!!!
Now I've got my read back to Celcius!!
Thanks again for your help on this one. It's been driving me nuts having it reading out in Fahrenheit all this time.
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
|
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
| Display Modes | |
|
|
| Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Temperature control | Bates88 | F-150 2004 to 2008 Forum | 16 | 03-17-2009 02:58 AM |
| Digital Display probleme | BCwheeler | F-150 2004 to 2008 Forum | 7 | 11-28-2008 12:12 AM |
| Climate Controls | alpine | Interior | 7 | 12-21-2007 01:41 AM |
| Posting Rules | |
