Joined
·
2,101 Posts
2007 f150 stereo
1 - 14 of 14 Posts
Joined
·
2,101 Posts
I have the 2005 diagram I guess I'll try with that and a multimeter
Joined
·
7,683 Posts
Its the same setup
Joined
·
2,101 Posts
Just finished installing it. Sounds great, looks nice, factory deck with an aftermarket sound system
Joined
·
7,683 Posts
Joined
·
2,101 Posts
It was a low pass filter you splice into your rear speakers from the factory wiring harness. This gives you your RCA jacks for an amp. we chose Rockford punch 800(old style, not that new crap they make) with a 600w Type R alpine subwoofer. Not 100% sound quality you would get with an aftermarket deck but sounds pretty good. This was my first time installing a sub with a factory deck, my buddy told me to go to town on the wires of his 07 150, I asked are you sure???? Took him a bit to answer then he said F it, just do it.
Joined
·
7,683 Posts
Cool
Now we need to see pictures
Now we need to see pictures
Joined
·
3,479 Posts
I'm pretty sure you added a Line Output Convertor, since a low pass filter is just a cross-over that takes out high signal and allows lows to pass in the device. Decks, amps, EQ often have them pre-installed in them now..
If you created RCA's from speaker wire they you took high level signal and made low level signal.. Hence. Hi->Low Level adapter.. Line Output Converter
![]()
http://stingerelectronics.com/prodDetail.asp?strID=174
Glad it worked out for you!
and let's see some pics!!
If you created RCA's from speaker wire they you took high level signal and made low level signal.. Hence. Hi->Low Level adapter.. Line Output Converter
http://stingerelectronics.com/prodDetail.asp?strID=174
Glad it worked out for you!
and let's see some pics!!
Joined
·
2,101 Posts
Yeppers that's want it was a Metra line output converter, not much to look at if I took pictures unless we pull the stereo back out. It's my buddy's truck I think he would think I was messed in the head if I told him I just want to take some pictures to show some buddies online. I tried to get him on hear, showed him the site but he's not much of a computer guy.
His truck looks just like Smokefan's 06 F150 but his is a stock 2007, he was talking about getting the Mojave package since the day he bought it so I showed him Smokefan's truck last Friday and he was real jealous.:shocked-smiley-9456
His truck looks just like Smokefan's 06 F150 but his is a stock 2007, he was talking about getting the Mojave package since the day he bought it so I showed him Smokefan's truck last Friday and he was real jealous.:shocked-smiley-9456
Joined
·
7,683 Posts
Just tell him that the members of this site have special pricing on those
:icon_cool:
Joined
·
2,101 Posts
For real???
Or you just messin"
:excited:
Or you just messin"
:excited:
Joined
·
4,153 Posts
Joined
·
366 Posts
k, now you MUST replace the factory deck.. for sound quality alone..
Joined
·
2,101 Posts
I said the samething when he showed me the converter and ask me to install it. He just bought his truck and want's the factory look on his dash so I said OK, it's your truck. I was suprised that it sounds good enough for that deck. I woulden't do it my self though. Every vehicle I get/own get's a new deck rite off the hop. My 06 F250 work truck is next, first morning after I get home I'm pulling the dash off....
1 - 14 of 14 Posts
