Ford Tough - Home of Canadian Ford Truck Enthusiasts banner

changing spark plugs

1251 Views 3 Replies 3 Participants Last post by  tear u a new 1
on the 98 ford f-150 , 5.4l tirton. from what i can see it looks like i need to pull the fuel rails to get at the coil over packs and to remove the plugs? if i loosen the 2 little bolts that atatch the fuel rail to the manifold, i should be able to pull the fuel rail up and the injectors should just come with it right? :pray:
1 - 1 of 4 Posts
on the 98 ford f-150 , 5.4l tirton. from what i can see it looks like i need to pull the fuel rails to get at the coil over packs and to remove the plugs? if i loosen the 2 little bolts that atatch the fuel rail to the manifold, i should be able to pull the fuel rail up and the injectors should just come with it right? :pray:
No, on contrary to what some people will say, you don't have to remove the fuel rails. The Coil On Plug (COP) assemblies will come out past the fuel rail.
You will have to remove your intake




1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top